Casing Coupling Adapter (PVC to Galvanized)

This PVC coupling was originally made to Adapter 6"pvc to 6.25" pvc Well Casing.
It also works great for extending Galvanized casing (as seen in the pictures).
We Call this Our P to M Adapter (Plastic to Metal).
We have provided images showing length and width of each end for reference.

(Not for old 5⅝" casing!!!) Measure Yours!

If attached to Galvanized casing, grind away any lip or rough spots using an Angle Grinder & Sanding disc. Apply cleaner and then glue (glue will help it slide on with force) The PVC glue will dry & hold it in place (even to the metal casing).

Forced fitment typically requires a 4x4 & sledgehammer, it will be a snug fit.
In some cases, grind a bevel around the metal casing.
In some cases if it only goes on 50% of the way, it's probably enough to hold. Pounding with absurd force may break the coupler.

This is a Non-refundable and Non-returnable item. Its been requested by many, so now they will be offered here for sale.

If a short piece of 6¼"Pvc is needed, leave a note in the order comments and I'll provide a short piece to glue into the "P" side. This will allow a Well seal to then fit correctly.

(H²O Mechanic has used hundreds of these over two decades, & only ever broken one from forcing it too hard. In that case I didn't grind the Galvanized enough to create a smooth lip at the casing edge)